What Causes Bubbles in DTF Pattern Transfers and How to Fix It?
Have you ever faced frustrating bubble issues during DTF pattern transfer? 😩 You’re working hard, but the results aren’t what you expected—either the stamp doesn’t come out well, or annoying bubbles appear. Don’t worry, let’s dive in and solve these problems together! 💪✨
Have you ever faced frustrating bubble issues during DTF pattern transfer? 😩 You’re working hard, but the results aren’t what you expected—either the stamp doesn’t come out well, or annoying bubbles appear. Don’t worry, let’s dive in and solve these problems together! 💪✨
🌡 Temperature Control: One of the most crucial factors! If the temperature is too high, it can damage the heat image and lead to bubbles. If it’s too low, the film won’t stick properly. Keep your temperature around 120°C for the best results.
🔧 Pressure Balance: Not all machines have a pressure gauge, but using the correct amount of pressure is key. Too much can ruin the texture, while too little won’t give you a strong transfer. Aim for moderate pressure to ensure a smooth transfer.
⏳ Transfer Time: Timing is everything! If it’s too short, the pattern won’t transfer well, and if it’s too long, bubbles will appear. A good rule of thumb is to aim for about 5 seconds to get the perfect result.
Mastering these three elements—temperature, pressure, and time—will help you avoid bubbles and achieve flawless DTF transfers. Keep experimenting, and you’ll perfect your technique! 🙌
